2plumbers.ca

Faucet Repair Services & Replacement in Toronto & the GTA

Most faucet problems are not emergencies, and we say so. 2plumbers provides faucet repair services across Toronto and the Greater Toronto Area, with licensed plumbers handling repairs, installations, and replacements for issues like dripping faucets, leaks, low water pressure, and shutoff valves that will not open or have frozen in place. A drip can wait a day; a spray from a split supply line under the sink cannot. The difference is whether water is where it should not be, and how fast it is arriving.

If you own or manage a home or property in the Greater Toronto Area and need a plumber for a faucet repair, replacement, or maintenance call, this is written for that decision. Call us and our assistant confirms what the faucet is doing and your postal code in the Greater Toronto Area, then connects you live to a plumber who is available now; you can also use the same contact flow to reach us quickly. For a drip or a replacement you have been planning, the online request reaches the same professional plumber during calling hours for faucet repair services, installation services, and replacement services. You will also find what counts as a faucet emergency, what to do before the plumber arrives, what affects repair cost, and why licensed work helps prevent water damage, wasted water, higher bills, and avoidable plumbing problems.

When it can’t wait

  • Water is spraying or pouring from under the sink and the shutoff valves will not close.
  • A hose bib or outdoor tap has split after a freeze and is running.
  • The faucet has come loose from the sink and water is running behind it into the cabinet.
  • The only shutoff you can find is the main, and closing it leaves the house without water for the night.

Any of these: call now to help prevent water damage. (437) 523-7772

Common faucet repair problems

Dripping faucet from the spout

A dripping faucet usually points to a worn cartridge, washer, or seal inside the faucet body, and continuous dripping is a clear sign the part needs attention. It can lead to increased water bills, create ongoing waste, and timely repair can help save water and contribute to conservation; on most modern faucets the cartridge is replaceable if the brand can be identified, often because of internal wear.

Leaking at the handle or base

A worn ring, seals, or other small components like the cartridge seal. Even a leaky faucet can waste up to 870 liters annually. Hidden leaks at the base can affect cabinets and may be one of the first signs of a faulty faucet, with water running down below where it is easy to miss until the wood swells. Visible rust is another sign of wear and tear.

Low pressure at one tap

A clogged aerator on the spout is the usual cause of low water pressure and takes minutes. If cleaning it does not help, mineral deposits in the aerator, a partially closed or failing supply valve, or debris in the cartridge is next, and if the flow issue also comes with difficulty turning the handle, the internal mechanism may be gunked up with sediment. Changes in water pressure can also point to high water pressure elsewhere in the plumbing system or other faucet issues that a professional plumber should diagnose and resolve.

Leak under the sink

Supply lines, shutoff valves and drain connections all live in the same cabinet. Braided supply lines fail with age; compression shutoffs seize and then weep when turned. A repair may also be needed if the faucet makes strange noises while the leak is active.

Frozen or seized shutoff valves

Common in Toronto homes where the valves have not been turned in years. Forcing one can snap the stem, and older valves may seize because of corrosion and wear and tear. A plumber replaces them with quarter-turn valves that, once the work is completed, are easier to use when you need them.

Before the plumber arrives

  1. If water is running, close the shutoff valves under the sink (clockwise). A single handle faucet and a two-handle setup may have different shutoff needs. If they will not move, do not force them; close the main valve instead.
  2. Empty the cabinet under the sink so the plumber can reach the valves and connections.
  3. Take a photo of the faucet and note the brand if it is visible, such as delta, moen, kohler, or pfister. Licensed plumbers can work on all faucet brands and models. It decides whether a cartridge is available or a replacement makes more sense.
  4. If you have already bought a new faucet, have it out of the box with its instructions so the plumber can focus on installing it.
  5. Dry the cabinet floor and check for soft spots; mention them to the plumber, since they can mean the leak has affected the wider plumbing system area under the sink.

What affects the cost

We do not quote prices; the plumber you are connected to does, before the work starts. These are the things that move the number.

Repair or replace

A cartridge or washer is a small part, if the brand is known and the part is available. If the faucet cannot be fixed, replacement is often more sensible than repair, especially when older damage, improper installation, or internal corrosion leads the plumber to recommend it. In some cases, replacing worn parts is enough to fix the issue and can make even a 10-year-old faucet feel new if the body is still in good shape.

The valves and lines underneath

Replacing seized shutoffs or aged supply lines while the plumber is already there is usually worth doing, and adds to the job; these plumbing repairs are often handled in the same visit to protect functionality and help avoid future leaks.

The fixture you choose

If a faucet is being replaced, the unit itself is the largest variable, and it is your choice; homeowners may choose a bathroom faucet or a kitchen model depending on the space and the overall look they want, and upgrading fixtures can improve both quality and function. The right replacement helps keep the space functional and visually consistent, including when finishing a new kitchen project.

Access

A tight cabinet, a stone countertop, or a faucet mounted from below with corroded nuts all take longer, especially when removing old faucet hardware requires specialized tools and more expertise because access is limited.

Licensed plumbers and safety

Replacing a faucet or a shutoff valve is plumbing work performed by licensed plumbers in our network, a compulsory trade in Ontario requiring a Skilled Trades Ontario certificate of qualification (306A). Every plumber in our network agrees in writing to hold the licences and insurance the province requires; the work is carried out by professional technicians who specialize in residential plumbing and heating, so ask for the number.

Toronto's water is moderately hard, which is why cartridges and aerators clog with scale over time. Cleaning an aerator is a safe thing to do yourself; anything involving the valves under the sink is safer left to the plumber, and quality workmanship may also be backed by a warranty, depending on the plumber and parts used.

Questions about faucet repair

Is a dripping tap worth calling about?

It is worth fixing, but it can wait for calling hours, so the online request is the right route. A steady drip wastes water and stains the basin, and the underlying seal only gets worse. If the drip becomes a stream, or water appears under the sink, that changes.

Why is the pressure low at only one faucet?

Almost always the aerator, the small screen at the tip of the spout, clogged with scale. Unscrew it, soak it in vinegar and rinse. If pressure is still low, the supply valve may be partly closed or failing, or the cartridge has debris in it; those are jobs for the plumber.

My shutoff valve under the sink will not turn. What should I do?

Do not force it; a seized stem snaps and the leak gets worse. Close the main shutoff instead, then have the plumber replace the valve with a quarter-turn ball valve. It is routine, and it means the next leak can be stopped in seconds.

Should I buy the replacement faucet myself?

You can, and many people do, because the fixture is a matter of taste. Make sure it matches the number of holes in your sink or counter. If you would rather the plumber supply it, say so on the call and they will quote both parts and labour.

Do you repair faucets yourselves?

No. 2plumbers.ca is a live call-connection service run by PatchLead. We confirm the problem and your location, then connect you on the same call to an independent plumber from our network who does the repair and quotes you directly. You pay nothing to use the service.

Talk to a plumber now

We answer in under 60 seconds and connect you live to an independent contractor who has agreed in writing to hold the licences Ontario requires, so the work can be handled by a licensed plumber. We are not the contractor.

Call (437) 523-7772